产品介绍

Y

Infrared camera for the metal industry up to 2000 °C

The spectral range of 500 to 540 nm of the newly developed thermal imager optris® PI 05M decreases measurement errors resulting from unknown or changing emissivities. Due to the spectral range as well as the continous measurement range from 900 to 2000 °C (1652 to 3632 °F), the compact infrared camera is perfectly suited for temperature measurements of molten metals.

The frame rate of 1 kHz as well as the high optical resolution enable an optimal adaption to the respective application.

Important specifications

• High dynamic CMOS detector with up to 764 x 480 pixels resolution
• Wide measurement range:
  900 °C to 2000 °C (1652 °F to 3632 °F) without sub-ranges
• Up to 1 kHz frame rate for fast processes
• Real-time analog output with 1 ms response time
• Extensive software package and SDK included
• 1 kHz linescanning function possible

Technical details of the optris PI 05M

• Scope of supply:
  

  USB camera incl. 1 lens,
  Lens tube with protective window,
  USB cable (1 m [9.8 ft]), 
  table tripod, 
  PIF cable incl. terminal block (1 m [9.8 ft]), 
  software package optris PI Connect, 
  carrying case Alu
  optional: CoolingJacket, high temperature cable

• Detector: CMOS (15 μm x 15 μm)
• Optical resolution (switchable)/ Frame rate:
  764 x 480 pixels @ 32 Hz
  382 x 288 pixels @ 80 Hz (swichable to 27 Hz)
  72 x 56 pixels @ 1 kHz
  764 x 8 pixels @ 1 kHz (fast linescanning mode)
• Spectral range: 500 ... 540 nm
• Temperature ranges:
   900 ... 2000 °C (1652 ... 3632 °F) (27 Hz mode)
   950 ... 2000 °C (1742 ... 3632 °F) (80 Hz and 32 Hz mode)
  1100 ... 2000 °C (2012 ... 3632 °F) (1 kHz mode)
• Optics:
  FOV @ 382 x 288 px:
  13° x 10° (f = 25 mm [f = 0.98 in])

  FOV @ 764 x 480 px:
  26° x 16° (f = 25 mm [f = 0.98 in))

• Thermal sensitivity (NETD)¹⁾: < 2 K (1400 °C [2552 °F]) for 27 Hz, 32 Hz and 80 Hz
                                                 < 2.5 K (1400 °C) for 1 kHz
• Accuracy: ±1.5 % of reading
• PC interface: USB 2.0 / optional USB to GigE (PoE) conversion

• High speed analog output (@ 1 kHz mode):
  0 – 10 V real-time output of 8x8 pixels (1 ms response time)

• Standard Process interface (PIF):
  0 – 10 V input, digital input (max. 24 V), 0 – 10 V output

• Industrial process interface (PIF): 
  2x 0-10 V inputs, digital input (max. 24 V), 3x 0 – 10 V outputs,
  3x relay (0 – 30 V/ 400 mA), fail-safe relays

• Cable length (USB):
  

  1 m (standard), 5 m, 10 m (3.3 ft [standard], 16.4 ft, 32.8 ft)
  5 m (16.4 ft) and 10 m (32.8 ft) also available as HT cable (180 °C [356 °F])

• Ambient temperature (T_Amb): 5 ... 50 °C (41 ... 122 °F)
• Storage temperature: -40 ... 70 °C (-40 ... 158 °F)
• Relative humidity: 20 - 80 %, non-condensing
• Enclosure (size/ rating):
   46 mm x 56 mm x 90 mm (1.81 in x 2.20 in x 3.54 in) / IP 67 (NEMA 4)²⁾
• Weight: 320 g (11.3 oz), incl. lens
• Shock³⁾: IEC 60068-2-27 (25 g and 50 g)
• Vibration³⁾: IEC 60068-2-6 (sinus-shaped)/ IEC 60068-2-64 (broadband noise)
• Tripod mount: 1/4-20 UNC
• Power supply: USB 

¹⁾ at 27 Hz, 32 Hz and 80 Hz 
²⁾ Only applies when lens protection tube is used 
³⁾ For more details see operator‘s manual 

..